The intelligent light curing assistant of the Bluephase PowerCure detects when the handpiece shifts during polymerisation.

Slight shift

• One vibration signal
• Extension of the light curing time by 10 per cent

Considerable shift

• Three vibration signals 
• Acoustic signal
• Termination of the curing process
• Repetition of the polymerisation process

When the light tip points into open space, the device cannot be activated.

Proper use is a prerequisite for sufficient polymerization. What is more, the quality of the device is just as important.

Unlimited compatibility with different materials
The wide spectrum of wavelengths renders the light suitable for all current light-curing dental materials.

High light intensity
The high light intensity of the curing light enables it to polymerise both direct and indirect restorations.

Consistent light performance
The light intensity of every curing mode is calibrated to +/–10%.

Uniform polymerisation
Due to homogeneous light distribution across the light tip.

The beam profiles taken under identical conditions at a distance of 0 mm by Dr Richard Price, Dalhousie University, Canada, show the distribution of the unfiltered blue and purple light at the tip of the Bluephase PowerCure light guide. The Bluephase PowerCure has an excellent beam profile that delivers a homogeneous light and wavelength output across the light tip. 

The backlit display keeps you informed about the curing program and time of the curing process.

You can choose between four different light curing modes

• 3sCure mode: 3000 mW/cm²
  Reliable curing of Adhese^® Universal and the 4mm composites Tetric^® PowerFill and Tetric^® PowerFlow in only 3 seconds.^[2] 

• Turbo mode: 2000 mW/cm²  
  5-second curing. Suitable for all types of restorations, particularly suitable for the polymerization of luting composites under indirect restorations. The high light intensity ensures that enough energy passes through all-ceramic crowns and inlays: e.g. made of IPS e.max^® or IPS Empress^®.

• High-power mode: 1200 mW/cm²
  Suitable for common day-to-day treatments.

• PreCure mode: 950 mW/cm²
  Particularly suitable for the removal of excess light-curing adhesive luting composites, e.g. Variolink Esthetic.

• In most cases, the 9mm light guide enables efficient one-time light exposure
• The high-performance Bluephase PowerCure offers short light exposure times starting from 3 seconds
• In direct procedures involving Class I and II restorations, the treatment time can be reduced by up to 51 per cent. You can cure Adhese Universal, Tetric PowerFill and Tetric PowerFlow in only 3 seconds using the 3sCure mode^[1] Learn more